Pump Accessories, Tubing, Connectors, Adapters, Sample Reservoirs and Biochip Microscope Frames
Heated frame and ITO glass heater to heat surface of microfluidic biochip.
*Nikon manual stage is flat with a circular section. Frame K sits on top of stage but is not clamped.
*Olympus stage is not flat and has 2 guides which move. Frame P sits on top of stage and connects to 2 guides.
Read the complete available background
Accessories
Pump Accessories, Tubing, Connectors, Adapters, Sample Reservoirs and Biochip Microscope Frames
For most up-to-date information on all our Accessories:
Visit eShop for prices
Inish Analyser Accessories
Biochip Microscope Frames
Droplet Generation Reagents
Pump Accessories
Sample Reservoirs & Holders
Tubing Kits
Tubing & Connectors
Inish Analyser Accessories
INISH ANALYSER ACCESSORIES
Sample & Waste Tubes
Standard Tubes
500 µL
500 each/pk
Inish Analyser Buffer
Label-free
cell analysis
No dyes / no stains
Fast Set-up & Analysis - 90 seconds including sample prep.
Compatible with wide variety of cell types.
250 assays/bottle.
Inish Cleaning Fluid
Easy to use
Simple maintenance of Inish Analyser
Fast - 60 seconds to run a wash.
250 assays/bottle.
Inish Calibration Kit
Easy to use
Check Inish Analyser is calibrated
Fast - 90 seconds to run a calibration assay.
100 assays/kit.
Biochip Microscope Frames
BIOCHIP MICROSCOPE FRAMES
Microenvironmental Chamber
Temperature controlled microscope frame
Heat your biochips
Heated frame and ITO glass heater to heat surface of microfluidic biochip.
Compatible with Cellix's biochip range.
Compatible with a wide range of microscopes (Zeiss, Nikon etc.).
Biochip Microscope Frame (K)
Non-heated
For manual & motorized microscope stages
Compatible with Cellix's biochip range.
Compatible with Nikon* manual-stage microscopes and motorized
stages (Prior, Marzhauer, Ludl).
Includes frame base, top cover and Eppendorf holder.
Frame material is anodized aluminium.
*Nikon manual stage is flat with a circular section. Frame K sits on top of stage but is not clamped.
Biochip Microscope Frame (P)
Non-heated Manual Microscope Stage
96-well plate compatible
Compatible with Cellix's biochip range.
Compatible with Olympus* and EVOS manual-stage microscopes
.
Includes frame base, top cover and Eppendorf holder.
Frame material is anodized aluminium.
*Olympus stage is not flat and has 2 guides which move. Frame P sits on top of stage and connects to 2 guides.
DROPLET GENERATION REAGENTS
Oil & Surfactant Solution
Droplet Generation
10mL/bottle
Product Code:
DROPGEN-OIL-SURF-10
Oil & Surfactant Solution
Droplet Generation
50mL/bottle
Product Code:
DROPGEN-OIL-SURF-50
Chip Pre-coating Solution
Droplet Generation
2.5mL/bottle
Product Code:
DROPGEN-CHIP-PRECOAT-2.5
Droplet Generaton Reagents
PUMP ACCESSORIES
Flow Sensors
Stable Flow
Accurate Flow Rate Delivery
Active feedback and PID control.
Compatible with ExiGo, UniGo and 4U pumps.
External Compressor
Pressure Pump Source
Pressurized air
Compatible with UniGo and 4U pumps.
Pump Manifold
3-Way Valve
Accurate Flow Switching
Inject reagents into 3 different channels at different times.
Automatic refilling of syringe.
Compatible with ExiGo syringe pump.
Syringes
Glass Syringes
Syringe pump compatible
100µL, 250µL, 500µL, 1mL and 5mL syringes.
Compatible with Mirus syringe pump.
Pump Accessories
Sample Reservoirs & Holders
SAMPLE RESERVOIRS & HOLDERS
PRESSURE PUMPS
15mL Sample Reservoir
Reservoir for Pressure Pumps
Compatible with UniGo/4U
Compatible with 15mL Sarstedt tubes and 1mL or 2mL Eppendorf tubes.
Plug-and-play interface.
Suitable for droplet generation, cell culture and autoclavable.
Free-standing or optical table mount.
PRESSURE PUMPS
Eppendorf Reservoir
Reservoir for Pressure Pumps
Compatible with UniGo/4U
Compatible with 1mL or 2mL Eppendorf tubes.
Plug-and-play interface.
Suitable for droplet generation, cell culture and autoclavable.
PRESSURE PUMPS
Cell Culture Bottle
Long term cell culture
Organ-on-chip & media recirculation
GL45 Glass bottle with plastic cap.
Connect to Cellix's pumps for cell culture or organ-on-chip studies.
Connect to Kima pump for media recirculation in microfluidic chips.
Plug-and-play interface and a
utoclavable.
Product Code: CC-BOTTLE
PRESSURE PUMPS
Eppendorf Holder
Holds 2 Eppendorfs
Sample Reservoir Holder
Magnetic bottom for easy placement on microscope stage.
Accessories query
Visit eShop for prices
Get a Quote or more information
For illustrations, downloads and the latest updates, visit the original published page.
View original Cellix reference